Sensortechnik Meinsberg - Measuring Transmitters

Network Measuring Transmitter with AZ 3000

Applications

Water Technology
Water Quality Monitoring Systems
Process Monitoring
Process Control

Features

cost-efficient measurement of process parameters
display for measuring values and clear calibration instructions
simultaneous temperature measurement
2 free scaleable analogue outputs and 1 relay output
USB interface and PC software
modular DIN rail mounted case
networking with display unit for 8 measuring values
firmware update via USB

Description

The transmitter series MV 3000 and MV 4000 are excellently suited for continuous measurements of one or more parameters in connection with process control units, data loggers, -printers or visualisation systems. They are characterised by high flexibility and simple handling. Calibrations can be done directly on transmitter. An additional display on MV 4000 simplifies measuring value checks, calibrations and makes each transmitter to a stand-alone measuring instrument.
All transmitters can be connected with the display unit AZ 3000. In this way the customer gets a complete multiparameter measuring system with data logger and fieldbus interface RS-485.
Simple software features configuring with logging of configuration parameters, calibration as well as displaying and recording of measuring values directly on PC using USB interface. Additionally the series MV 4000 allows actualisation of firmware via flash update.

Specifications - MV 3000 / 4000

Temperature compensation

automatically with Pt 1000 or fixed temperature

Kalibrierung

using 2 configurable buttons or PC software

Signalisation

LED: measuring value stability for calibration, measuring, errors

Display (Series MV 4000)

graphic LCD, 48 x 64 pixel, back-lighted,
display for 3 values (value 1, value 2 and temperature value)
clear calibration instructions

Controller outputs

1 limit relay, NOC, 24 V AC/DC, max. 1 A

Analogue outputs

2 x 0(4) ... 20 mA oder 2 x 0 ... 5 V

Interfaces

MV 4000: USB (optional RS-232)
MV 3000: RS-232
for configuration, calibration and data logger

Dimensions

22.5x99x114.5 mm (W x H x D)

Specifications - General

Firmware update

via PC-interface (only MV 4000)

Power supply

15 ... 24 V AC / DC, ca. 1.5 VA

Enclosure

plastic case for mounting on rail tracks DIN EN 50022-35
protection IP 40

EMC

EN 61326 class B

Overview system componnents - MV 3000 and MV 4000


Type	Component	Description

MV 40XX	Transmitter	display USB interface scaleable current outputs	2 x 0(4) ... 20 mA 1 floating relay output
MV 40XX-U	Transmitter	display USB interface scaleable voltage outputs	2 x 0 ... 5 V 1 floating relay output
MV 30XX	Transmitter	RS-232 interface scaleable current outputs	2 x 0(4) ... 20 mA 1 floating relay output
MV 30XX-U	Transmitter	RS-232 interface scaleable voltage outputs	2 x 0 ... 5 V 1 floating relay output

Overview Transmitters


with Display	without Display	Measuring range	Resolution	Temperature measurement

MV 4010	MV 3010	pH value pH -2 ... 16	pH 0,01	-10 ... 130 °C res. 0,1 °C
MV 4015	MV 3015	Redox potential -2000 ... +2000 mV		-10 ... 130 °C res. 0,1 °C
MV 4016	MV 3016	Ion concentration sensor specific (ISE)	pH 0,01	-10 ... 130 °C res. 0,1 °C
MV 4020	MV 3020	Conductivity (2-pol) 0 ... 200 µS/cm 0 ... 2000 µS/cm 0 ... 20 mS/cm 0 ... 100 mS/cm auto range salinity 2 ... 42 g/kg resistor	0,1 µS/cm 1,0 µS 0,01 mS/cm 0,1 mS/cm	-10 ... 130 °C res. 0,1 °C
MV 4025	MV 3025	Conductivity (4-pol) 0 ... 200 µS/cm 0 ... 2000 µS/cm 0 ... 20 mS/cm 0 ... 500 mS/cm auto range salinity 2 ... 42 g/kg resistor	0,1 µS/cm 1,0 µS 0,01 mS/cm 0,1 mS/cm	-10 ... 130 °C res. 0,1 °C
MV 4030	MV 3030	Dissolved oxygen 0 ... 200 % 0 ... 20 mg/l	0,1 % 0,01 mg/l	-10 ... 130 °C res. 0,1 °C
MV 4060	MV 3060	Concentration (chlorine, dioxide, ...) 0 ... 2(10) mg/l	0,01 mg/l	-10 ... 130 °C res. 0,1 °C

Measuring Transmitter MV 3000 / 4000